Skip to content

SplashCap

Improve Safety & Productivity. 

The SplashCap is a twist-on wound irrigation shield that allows a clinician to deliver hundreds of milliliters of irrigation fluid directly to a wound in seconds.  It is the first wound irrigation shield to fit on compatible saline bottles for manual wound irrigation.  This original SplashCap fits on all standard Baxter and BBraun saline irrigation bottles. 

Use the SplashCap to provide high pressure, high volume irrigation that saves time and money compared to tediously refilling syringes. It improves throughput and turnaround times by reducing inefficiencies.  The SplashCap is used everyday by your colleagues in hospitals across the US to save time and money.

To learn more, please scroll down to review the info below.

For those of you that have been using our products and spreading the word to your colleagues, Thank You!

Faster than Syringes.

Works with Saline Bottles.

Kid Friendly.

Economical.

Fun to Use.

Better Wound Care is Now Easier.

Scroll Down

Built In Nozzle

Built In Shield

Fits On
Compatible
Saline Bottles

including:
Baxter
BBraun

YOUTUBE LINK

MORE INFO

PDF FLYER

ORDER

Scroll Down

GET 'E.R. DONE!

splash

Save Time. Save Money. Safety.

Save Time

The SplashCap makes it easy to delivery large volumes of irrigation fluid in seconds. 

The fluid goes directly from the saline bottle to the wounds by simply squeezing the bottle.

Approximately 10% of Emergency Room Visits are for lacerations.   By saving minutes off of the procedure, set up and waiting times; there is a big time savings for the patient treated AND a bigger savings for the five patients downstream waiting for the provider.  

The SplashCap is so easy.  It takes seconds to irrigate.   Even the busiest provider will do it themselves, since and it is faster than waiting on someone else.

 

Much Faster than Syringes

Syringes are tedious to use, very messy and scare kids.

It would require refilling a 10 ml syringe 50 times to equal to deliver 500 ml of saline. 

No one wants to do tedious length procedures that slow them down.  Patients wait for the doctor; who is waiting for the nurse to tell the tech to irrigate the wound; who then does a lengthy irrigation procedure and then must find the doctor. 

When one patient’s procedure takes five minutes longer, the provider’s other patients are all waiting an additional five minutes each for a total of 30 wasted minutes.*

 

Save Money

Time is money. 

Since wound care is typically about 10% of ER visits, saving 30 minutes for 10% of your patients can save 3 minutes of turnaround time for your department. 

Shaving 3 minutes off a ER department turnaround time can reduce staff needs, improve bedspace availability, reduce overhead per patient, and can save MILLIONS for a hospital system. 

The SplashCap retrofits to existing saline bottles sold by Baxter and BBraun.  This simplifies procurement and reduces costs versus using proprietary bottles.

The SplashCap saves time and it costs no more, and often much, much less than competitor’s products. 

Save millions without paying more.

Other Products Cost More

Syringe irrigation is slow and tedious. 

Prolonged procedures cause bottlenecks.  This leads to staff playing cat and mouse games; which waste time, money,  department budget resources and lead to patient dissatisfaction. 

The SplashCap costs no more than the combined cost of using a large syringe, basin, and syringe shield.  Also, when syringe shields are provided pre-packaged in irrigation kits, the cost of the kit is often marked up significantly and the shields may go unused and wasted.

Competitor products cost more.  For example high volume irrigation products attached to spring loaded syringes, oxygen tubing and electric washers cost A LOT more.  Products with proprietary bottles are more expensive.  

Needlesticks and backsplash injuries are unsafe.  These injuries  must be reported and treated.  Facilities that don’t provide necessary protection for staff can be fined.  

 

Safety

The Built In Shield enhance universal precautions to prevent splatter to protect staff and patients.  

The Built In Nozzle with the long shield allows you to visualize and accurately target the wound with a single stream.

Having a shield makes it easier and safer to irrigate wounds so that it actually gets done (rather than ignored) for better patient care.  

Having a shield allows you to squeeze the bottle harder to generate more pressure without getting splattered.  

Safer than Poking Holes

Poking holes in bottles can lead to needlesticks, since the bottle caps are thick and the needles will break.  

Having multiple holes in a bottle with multiple streams means that much of the fluid will hit outside of the wound and be wasted. 

Without a transparent shield you cannot accurately target the wound without leaning down close to the body fluids to monitor or irrigating from a far causing a infectious hazard.

Without a shield, the harder you squeeze, the more you splatter. 

 

Scroll Down

What's the PSI?

a. At least 8 psi
b. Similar to a syringe
c. It depends on how hard you squeeze bottle
d. It depends on how hard you squeeze syringe

e. YES! ALL of the Above

Scroll Down

“…thinking outside the docs”

contact us for details on available resources

Video Link

More Info

PDF Flyer

FAQs

comments

notices

directions

value analysis

evaluation forms

data

fun facts

competency form

SPLASHCAP-COM-R

Contact Info Below

order now

Place Your Order!
Click Icon

telephone

404-252-5442

location

Atlanta, GA 30342

legal notices

Patented
Patent Pending
Reg.Trademarks, etc
Click Icon for More Info